Simucube2 Ultimate - Direct Drive Force Feedback
Ground Shipping is included in all orders. Contact us for overnight shipment quotes.
Welcome to the honored club of Direct Drive force feedback SimRacers! Simucube 2 is the next level force feedback technology.
Simucube 2 Ultimate :
Are you a professional driver looking to maximize your potential on simulator training, or an professional eSports SimRacer where every hundredth of seconds counts? If so, welcome to the future! Simucube 2 Ultimate Direct Drive force feedback wheel base puts you in the absolute lead position trough its unmatched personalization of force feedback characteristics and unparalleled responsiveness.
Abundant 32 Nm of torque and maxed-out torque response rate is at your disposal at anytime. Ultimate is based on Austrian made maximally dynamic industrial motor optimized for simulation. It is equipped with a 24 bit resolution Hiperface angle sensor to be fully utilized by the most advanced signal processing unit seen in simulators.
Includes
- Simucube2 Ultimate wheel base
- Simucube 2 Quick Release (QR) for wheel base, with one wheel side counterpart to be equipped on standard wheel
- 50-70 mm wheel adapter, and 30 mm spacer for wheel side QR extension
- power supply
- cabling
- Premium Torque off button
- SimCraft made Servo Mount Included
Direct Drive Force Feedback
By coupling a wheel directly to an extremely fast responding direct drive torque motor, the physics of the simulated race car and track come to life. Such ideal torque transducer adds nothing of it’s own to be felt – it’s just a pure connection to the road behind the wheel. Direct drive is the only known method to achieve sub-millisecond latency and real-life race car dynamic range – the keys to true transparency.
Ultra Low Latency
Reaction time is everything when it comes to overtaking opponents, or taking corrective action to prevent loss of tire grip. Simucube 2 ultra low latency not only keeps the driver a step ahead, but naturally also removes barriers between the simulated world and the driver.
High Dynamic Range
Sensing the tiniest changes in the tire grip same time with high steering force of sharp corner will transmit the forces of every part of race car to the driver is the way it works in real-world. High dynamic range of force feedback equals to maximizing the flow of physical information from the simulator the the driver. It happens to be the peak force moment when there is the greatest need to precisely sense the emerging loss of grip. Being able to sense that enables the driver to utilize 100% of the race car potential.
Natural Signal Processing
Bypassing the sometimes coarse digitally sampled force commands from common PC racing simulations, you will be able to feel the force feedback as it was intended by the racing simulator’s physics engine. Moreover, the real nature modelling based inertia, damping and friction effects calculated right inside the simulator hardware will make the driver feel like they’re connected to the real world – you might forget it’s a simulator.
Full metal construction
The body of all Simucube 2 models have been built from precision machined solid metal parts.
Robotics grade angle sensor
Simucube 2 is equipped with precision industrial robotics grade angle sensors with resolution of 4 Million steps per revolution. The quality of the angle sensor information has paramount importance when calculating natural physics effects and filters. Any imperfection of the sensor signal would feel like a distortion in the reality. All Simucube 2’s signal processing units have been optimized to take full advantage of the unmatched sensor precision.
Direct Drive brushless torque motor
Simucube developer team compared over 40 motors, hand-tested over ten of them, then picked the best three motors, and finally customized them to suit absolutely flawlessly in direct drive racing simulation. SC2’s latest generation motor technology delivers unforeseen torque response rate and clarity. FEM optimized motor magnetic design yields practically zero torque ripple and magnetic cogging. Simucube 2 ‘s are also individually tested and verified to exceed inhumanly tight tolerances in production.
Isolated surge protected USB
No Simucube driver shall ever become the victim of interference prone USB connection. Thanks to a galvanic isolation layer between the USB and power electronics. This also protects the PC from current spikes. In addition, all connectors found on the back of SC2 are ESD protected exceeding the industrial requirements.
Dual CPU architecture
To unleash full potential of the glorious motor and to process signals at maximum precision, Simucube 2 has been given a dedicated 216 MHz real-time processor in addition to an dedicated 144 MHz PC USB interface CPU. Unique dual CPU architecture ensures zero impact on ultra low latency performance even when all processing and simulator actions are running simultaneously. The new 216 MHz processor features superscalar ARM architecture, making it effectively four times faster than the 72 MHz processor of IONI drive in Simucube 1.
Passive cooling
Thanks to high efficiency direct drive operation optimized motors and clever electronics heat guiding, there is no dust collecting or noisy fans in any Simucube 2. High efficiency motor puts out less heat and consumes less power.
Oversized rugged power components
All Simucube 2’s electronics have been designed in Finland by Granite Devices – also known from their reliable industrial motor drives. Simucube has been proudly built with the same uncompromising industrial quality principles. This means prioritizing on ruggedness and longevity over cost of the components. Simucube 2 power MOSFETs are rated over 2X their actual need to make them virtually immortal.
Remote Torque off button
Because high torque may pose a hazard if the simulator software goes nuts, or if driver becomes careless with the high torque wheel, every Simucube 2 comes with externally mountable Torque off button. Optionally the button box may be upgraded to a stylish all-metal version with an additional external power-switch.
Hot Swap Wheels
Becoming master of multiple race car classes is finally reality without a single compromise. Different kinds of wheels are rapidly and securely interhcangeable thanks to solid-metal Quick Release and low-latency Wireless Wheel connection.
Simucube Quick Release™ (SQR)
Precision machined full-metal Simucube Quick Release guarantees zero backlash and rock solid operation even under the extreme torques of direct drive wheel base. Guided rail design ensures perfect lock-in every time, and spring preloaded pin mechanism will ensure non-degrading tight coupling over thousands of swap cycles. Just like rest of Simucube, SQR has been built to be virtually immortal. The only theoretically wearing part, spring loaded pin mechanism, is made out of standard stock parts making it user serviceable.
Simucube Wireless Wheel™ (SWW)
Built-in wireless wheel receiver in Simucube 2 automatically connects to your Simucube Wireless Wheel just by briefly pressing both paddle shifters simultaneously. The wireless wheel transmission protocol has been specially engineered to provide consistent and unbreakable millisecond range response times, as well as extremely long battery life of over 5 years. Swapping wheel will also take effect immediately without the need of re-assigning controls in the simulator.
